Posts in category: Water / Diesel pumps

One of the most complete product ranges in the sector, with over 160 different versions available. TM (end-suction), TMB (double support and side suction). For applications requiring particularly high pressure, multi-stage horizontal centrifugal pumps are designed for lifting stations, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers, condensate extraction and water supply.
The super duplex versions are the ideal choice for use in desalination plants. Components designed with thicknesses sufficient to guarantee the greater resistance to wear and service life at the operating pressures.

Multi-stage horizontal centrifugal electric pumps, suitable for pumping clean water and chemically non-corrosive liquids, for residential uses, irrigation, agriculture and automated distribution in medium-small tanks, gardening, irrigation and water supply.
Thanks to their high head, they can also be used as pilot pumps in pressurization groups

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 110 m3/h
• 162 m
• 22 kW
• 60 Hz VERSION
• 110 m3/h
• 153 m
• 22 kW

Multi-stage vertical electric pumps, non-self priming, compact to minimise footprint, suitable for lifting stations with or without autoclave, irrigation systems, and wherever high pressures are required. Wide range with power ratings of up to 55 kW, can be supplied in different configurations with different metals/alloys and different motors.

The MK series pumps are equipped with an integrated bearing to support axial thrust, improving pump service life and allowing them to be coupled with normal standardised motors without having to use standardised motors fitted with axial bearings.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 110 m3/h
• 394 m
• 55 kW
• 60 Hz VERSION
• 110 m3/h
• 385 m
• 55 kW

AVAILABILITY AND VARIANTS

• Also available in monobloc version, MKM
• ANSI standard hole patterns on request

OPTIONAL ACCESSORIES

• Motor-mounted inverter up to 18.5 kW
• Electrical switchboards

Monobloc electric pumps. Used for water supply from tanks or basins for domestic, civil, agricultural use and where water pressurisation is required in general. The impellers in thermoplastic resin guarantee durability even when sand is present.

Modular system: a single pump allows three different versions to be obtained, simply by changing the lower part (intake grille, suction base, suction fitting)

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 18 m3/h
• 113 m
• 4 kW
• 60 Hz VERSION
• 21 m3/h
• 127 m
• 5 kW

Also suitable for horizontal operation
Electrical switchboards

Safe, highly efficient, adaptable and durable, the L range of in-line pumps with in-line fittings can pump fluids of up to 140°C as standard. They are used for circulation of hot and cold water for installation in civil and industrial heating or cooling systems, for sanitary DHW, pressurisation groups, and other civil and industrial applications. Monobloc version up to DN 65, larger sizes with rigid joint for standardised motors

Over 170 models.
Next-generation pumps, designed with minimum energy efficiency index on average greater than 7.
Laboratory tests performed to offer solutions even for demanding operating conditions.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 800 m3/h
• 102 m
• 90 kW
• 60 Hz VERSION
• 700 m3/h
• 80 m
• 90 kW

Single-stage end-suction centrifugal pump, body with dimensions meeting and exceeding EN 733. Ideal for applications where very high flow rates are required, such as irrigation systems, for water supply in general, heating or refrigeration, in the industrial, marine or mining sectors.

Base designed to ensure strength and safety, optimised weight and reduced vibration.
The super duplex versions also allow for use in desalination plants. Can be supplied with bare shaft, as a complete unit or complete unit with joint and base, without motor

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 2300 m3/h
• 97 m
• 400 kW
• 60 Hz VERSION
• 1700 m3/h
• 120 m
• 500 kW

End-suction pumps with body with EN733 standardised dimensions, suitable for recirculation, heating and heat recovery systems, as well as water supply, pressurisation groups, refrigeration systems, irrigation, industry, and in the marine and mining sectors.

Available in different metals and alloys, with short delivery times even for the super duplex version.
New models for power ratings of up to 90 kW.
Base designed to ensure strength and safety, optimised weight and reduced vibration.
Can be supplied with bare shaft, as a complete unit or complete unit with joint and base, without motor

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 675 m3/h
• 129 m
• 90 kW
• 60 Hz VERSION
• 800 m3/h
• 113 m
• 110 kW

Super-flexible range with integrated rigid joint for standardized motors: the back pull-out design offers facilitated maintenance without removing the pump body from the system. Highly efficient, with a robust and reliable design, the MG series pumps are ideal for recirculation, heating and heat recovery systems, as well as water supply and pressurization groups.

The range has been expanded with new models to cover wider ranges.
Suction profile developed to increase intake capacity, reduce NPSH and problems relating to cavitation.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 825 m3/h
• 129 m
• 90 kW
• 60 Hz VERSION
• 800 m3/h
• 113 m
• 90 kW

An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery times. Compact design to minimise costs and footprint, heavy-duty design allows for long machine lifecycle.
Their characteristics allow for use in a wide range of environments, from recirculation and air conditioning systems to water supply, for pressurisation groups etc.

Available in different metals and alloys, with short delivery times even for the super duplex version.
New models for power ratings of up to 90 kW.
Back pull-out design

Technical Features
• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 825 m3/h
• 129 m
• 90 kW
• 60 Hz VERSION
• 800 m3/h
• 113 m
• 90 kW

AVAILABILITY AND VARIANTS

• Version with ACS certification for potable water available
• Version for fluids up to 120°C on request
• Possibility of special paints and coatings
• ANSI standard hole patterns on request

OPTIONAL ACCESSORIES

• Pre-filters
• Motor-mounted inverter up to
• 18.5 kW
• Electrical switchboards

Range designed specifically for firefighting applications, with performance meeting EN 12845.
Available in different configurations depending on the needs and requirements of the end user.
Can be supplied with bare shaft, as a complete unit or complete unit with joint and base, without motor.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50HZ VERSION
• 675 m3/h
• 129 m
• 90 kW
• 60HZ VERSION
• 800 m3/h
• 113 m
• 110 kW
• Can be coupled to Diesel engines