Posts in category: Water / Diesel pumps

Monobloc electric pumps. Used for water supply from tanks or basins for domestic, civil, agricultural use and where water pressurisation is required in general. The impellers in thermoplastic resin guarantee durability even when sand is present.
Modular system: a single pump allows three different versions to be obtained, simply by changing the lower part (intake grille, suction base, suction fitting)

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 18 m3/h
• 113 m
• 4 kW
• 60 Hz VERSION
• 21 m3/h
• 127 m
• 5 kW

Bottom-intake pump with motor positioned above the pump inside the jacket. For ballast applications.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 270 m3/h
• 48 m
• 45 kW
• 60 Hz VERSION
• 320 m3/h
• 70 m
• 45 kW

New high-efficiency range, designed to guarantee the highest levels of performance even in harsh environments, such as mining and offshore applications. Typical applications include agriculture, mining, offshore installations, civil and industrial uses. Each pump can be adapted from the standard configuration to meet a wide range of application requirements.
The investment-cast components guarantee maximum resistance to wear

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 725 m3/h
• 196 m
• 300 kW
• 60 Hz VERSION
• 545 m3/h
• 183 m
• 220 kW

AVAILABILITY AND VARIANTS
Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped
• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

Available both for horizontal and vertical operation in 2- and 4-pole models, these pumps are incredibly reliable even in extreme operating conditions. The wide range of available materials, not just for the pump body but also for the individual components, offers maximum flexibility to meet requirements imposed by specific working conditions.
The investment-cast components guarantee maximum resistance to wear. Integrated check valve in delivery fitting.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 725 m3/h
• 196 m
• 300 kW
• 60 Hz VERSION
• 545 m3/h
• 183 m
• 220 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped

OPTIONAL ACCESSORIES

• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

New high-efficiency range, designed to guarantee the highest levels of performance even in harsh environments, such as mining and offshore applications. Typical applications include agriculture, mining, offshore installations, civil and industrial uses. Each pump can be adapted from the standard configuration to meet a wide range of application requirements

The investment-cast components guarantee maximum resistance to wear. Each pump can be adapted from the standard configuration to meet a wide range of application requirements. Integrated check valve in delivery fitting.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 575 m3/h
• 384 m
• 300 kW
• 60 Hz VERSION
• 600 m3/h
• 365 m
• 300 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped
• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

A pump which has been thoroughly and extensively tested and trialled even for extreme applications, such as in the oil and gas sector, designed to guarantee the highest level of performance even in harsh environments, such as in mines and offshore applications. Typical applications: offshore for secondary uses, agriculture, mining, maritime, civil and industrial sectors.
The investment-cast components guarantee maximum resistance to wear. Each pump can be adapted from the standard configuration to meet a wide range of application requirements. Integrated check valve in delivery fitting.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 575 m3/h
• 384 m
• 300 kW
• 60 Hz VERSION
• 600 m3/h
• 365 m
• 300 kW

AVAILABILITY AND VARIANTS
Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped
• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

Robust, reliable and highly efficient. Used in lifting stations, marine, offshore and mining applications, as well as in agriculture and whenever high flow rates are required.

Able to operate in demanding environments, the investment-cast parts provide peerless reliability. The super duplex version is suitable for use in brackish or sea water.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 355 m3/h
• 316 m
• 185 kW
• 60 Hz VERSION
• 400 m3/h
• 330 m
• 185 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped

OPTIONAL ACCESSORIES

• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

SEMI-AXIAL ELECTRIC PUMPS
This robust and reliable pump series can be coupled to 8″, 10″ or 12″ motors, depending on the size. A wide range of materials and configurations make this product extremely flexible for various final applications: from irrigation systems to offshore platforms, civil installations to industrial and mining applications.
Excellent durability in demanding applications thanks to the exclusive anti-wear components and investment cast components. The super duplex version is ideal for harsh marine environments.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 400 m3/h
• 388 m
• 170 kW
• 60 Hz VERSION
• 450 m3/h
• 287 m
• 185 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped
• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

In high head applications, the compact and reliable NR 250 is the ideal pump, both compact and reliable. Suitable for lifting and supply in civil and industrial systems, supplying autoclaves and cisterns, washing systems, irrigation and underground extraction.
Incorporated check valve and steel outer jacket to ensure greater protection of the pump.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 210 m3/h
• 955 m
• 185 kW
• 60 Hz VERSION
• 230 m3/h
• 885 m
• 185 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water

OPTIONAL ACCESSORIES

• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors

Brand-new range of 8″ very-high efficiency submersible pumps. Designed to guarantee the highest levels of performance even in harsh environments, such as mining and offshore applications.
The investment cast impellers and diffusers offer excellent wear resistance. The integrated check valve in the delivery fitting guarantees greater safety.

• MAXIMUM FLOW RATE
• MAXIMUM HEAD
• MAXIMUM POWER
• 50 Hz VERSION
• 200 m3/h
• 294 m
• 110 kW
• 60 Hz VERSION
• 220 m3/h
• 310 m
• 110 kW

Horizontal operation available on request

• Available with PE+PA motor for use with inverter or operation with hot water
• FPM gaskets are available for the stainless-steel version for greater durability, depending on the fluid to be pumped

OPTIONAL ACCESSORIES

• Cooling jacket
• Cables
• Switchboards
• PT 100 sensors