Posts in category: Industrial Fans

K-R
Belt drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously. Version with cooling disk up to +300°C.

Standard arrangement
Arrangement 1: Bare shaft without transmission and motor.
Arrangement 9: Belt drive. Motor fixed aside the support frame.
Arrangement 12: Belt drive. Fan and motor fitted on the base frame.

Motors
2, 4 or 6 pole, IE3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KM-R
Belt drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously. Version with cooling disk up to +300°C.

Standard arrangement
Arrangement 1: Bare shaft without transmission and motor.
Arrangement 9: Belt drive. Motor fixed aside the support frame.
Arrangement 12: Belt drive. Fan and motor fitted on the base frame.

Motors
2, 4 or 6 pole, IE3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KC-R
Belt drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously. Version with cooling disk up to +300°C.

Standard arrangement
Arrangement 1: Bare shaft without transmission and motor.
Arrangement 9: Belt drive. Motor fixed aside the support frame.
Arrangement 12: Belt drive. Fan and motor fitted on the base frame.

Motors
2, 4 or 6 pole, IE3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KB-P
Belt drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously. Version with cooling disk up to +300°C.

Standard arrangement
Arrangement 1: Bare shaft without transmission and motor.
Arrangement 9: Belt drive. Motor fixed aside the support frame.
Arrangement 12: Belt drive. Fan and motor fitted on the base frame.

Motors
2, 4 or 6 pole, IE3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KA-P
Belt drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously. Version with cooling disk up to +300°C.

Standard arrangement
Arrangement 1: Bare shaft without transmission and motor.
Arrangement 9: Belt drive. Motor fixed aside the support frame.
Arrangement 12: Belt drive. Fan and motor fitted on the base frame.

Motors
2, 4 or 6 pole, IE3* high efficiency (the rpm of each motor will be adapted according to the calculation for each drive), three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

K-R

Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.

Standard arrangements
Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
Arrangement 8: Flexible coupling that connects the motor to the fan shaft. Version with cooling disk up to +300°C.

Motors
2 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KM-R

Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.

Standard arrangements
Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
Arrangement 8: Flexible coupling that connects the motor to the fan shaft. Version with cooling disk up to +300°C.

Motors
2 or 4 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KC-R

Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.

Standard arrangements
Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
Arrangement 8: Flexible coupling that connects the motor to the fan shaft. Version with cooling disk up to +300°C.

Motors
2 or 4 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.

KB-P

Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.

Standard arrangements
Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
Arrangement 8: Flexible coupling that connects the motor to the fan shaft. Version with cooling disk up to +300°C.

Motors
2 or 4 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
*From 75kW to 200kW, the motor will be IE4.

KA-P

Direct drive, single inlet centrifugal fan. Manufactured from carbon steel protected with cataforesis primer + polyurethane paint finish RAL 7045.
Working temperature range: -20ºC/+100ºC continuously.

Standard arrangements
Arrangement 4: Impeller mounted on the B3 motor shaft supported by the pedestal. Version with cooling disk up to +220°C.
Arrangement 5: Impeller mounted on the B5 motor shaft fitted on the casing sideplate. Version with cooling disk up to +220°C.
Arrangement 8: Flexible coupling that connects the motor to the fan shaft. Version with cooling disk up to +300°C.

Motors
2 or 4 pole, IE3* high efficiency, three-phase 230/400V 50Hz up to motor size 112 and 400/690V 50Hz for higher motors. IP55 protection, class F.
From 75kW to 200kW, the motor will be IE4.