Posts in category: Air Conditioning

Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with high crowding.

• R410A refrigerant

Roof-Top autonomous air-condensed conditioner with structure in powder-painted galvanised sheet metal and 50 mm panels insulated with polyurethane. MB3 configuration with mixing chamber with three dampers, intake fan and heat recovery on the expelled air. Cooling circuit with scroll compressor with high yield and low electricity absorption, standard Cu-Al thermal heat exchange coils (pre-painted Cu-Al available as optional) or Cu-Cu Sn. Standard or high-head fans on ambient side, plug fans with permanent magnets motor and differential pressure switch. Axial fans (outer side) with pressostatic rpm control device or EC motor. Flat G4 filters as standard on the outdoor air flow and intake. F7 or F9 pocket filters available upon request, but on delivery only. Electronic condensation and evaporation control as standard, for further extending the operating limits of the unit.

• Treatment section with plug fan fans coupled to EC brushless motors
• Thermodynamic heat recovery
• Enthalpical freecooling / freecooling option
• For medium-crowded applications

Description
Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with average crowding.

• R410A refrigerant
• Cooling only
• Cooling and heating
• Scroll compressor
• Plug fan

SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas.
SPL is an air handling unit for sports areas and swimming pools. The unit combines a cooling circuit with a recovery system for sensible and latent air taken from the damp air expelled from the rooms, thereby optimized for reduced energy consumption. The unit is a “plug & play” machine (i.e. ready for use) whose main function is to dehumidify and, at the same time, ensure the control of the hygro thermometric conditions in the rooms. It has an effective heat recovery system (water side) that can be used to partially heat the swimming pool water at zero cost. The structure and all the internal components are built to guarantee optimum corrosion resistance.

NCD is an air treatment control unit for use in commercial and industrial systems for large environments.
NCD is an air treatment control unit with double sandwich buffer panelling fixed to the frame with a panel-holder (no screws are used, to avoid any risk of seepage), with aluminium profiles with rounded-edge forms. The internal machine components are: new, high-efficiency heat exchangers with limited pressure drops, dual-suction centrifugal fans with forward or reversed blades, plug fans with inverter control, 3-damper mixing chamber, wide choice of high-surface filters for reducing pressure drops and increasing the lifespan, PVC drop separator, heat recovery units with high thermal exchange. Wide range of accessories for air suction/expulsion and for the fan motor sections, and for common sections like the pressure gauge and pressure switch.

TVS is a ductable thermoventilating unit, designed to guarantee high heads in small or medium-sized rooms with nominal air flow rates from 800 to 5200 m³/h. As standard, it is suitable for 2-pipe systems, but the availability (as an accessory) of the secondary water coil, which can be installed inside the unit downstream of the main coil, makes it also suitable for 4-pipe systems. The unit is suitable for both horizontal installation in the false ceiling and vertical installation on the wall for greater versatility of use.

• Cooling capacity: 4.40 ÷ 27.80 kW
• Heating capacity: 4.40 ÷ 66.40 kW
• Cooling and heating
• Centrifugal fan
• Inverter centrifugal fan
• Ducted installation
• For two pipes plants
• For four pipes plants (Option)

TVH is a ductable thermoventilating unit, designed to guarantee high heads in small or medium-sized rooms with nominal air flow rates from 800 to 5200 m³/h. As standard, it is suitable for 2-pipe systems, but the availability (as an accessory) of the secondary water coil, which can be installed inside the unit downstream of the main coil, makes it also suitable for 4-pipe systems. The unit is suitable for horizontal installation in the false ceiling.

• Cooling capacity: 4.70 ÷ 29.30 kW
• Heating capacity: 4.40 ÷ 73.90 kW
• Cooling and heating
• Centrifugal fan
• Inverter centrifugal fan
• Ducted installation
• For two pipes plants
• For four pipes plants (Option)

TUN is a duct-type air-conditioning unit suitable for small/medium-sized applications in the residential, commercial and hotel sectors.

• Cooling capacity: 4.70 ÷ 33.50 kW
• Heating capacity: 14.20 ÷ 28.90 kW
• Cooling and heating
• Centrifugal fan
• Ducted installation
• For two pipes plants

TUN is a fan coil unit designed for vertical or horizontal installation in channels and false ceilings. Several rooms can be served, thanks to a distribution plenum. The machine is fitted with a coil of 4-6 rows supplied with hot or cold water (in copper pipe, with aluminium finning), dual-suction centrifugal fans with forward blades with a directly coupled multispeed motor (including 3 selectable speeds), class G2 air filters fitted as standard and positioned on the suction line, an insulated internal condensation collection basin in galvanised metal. 2-row post-heating coils in copper/aluminium are also available. Characterised by compact dimensions and low noise levels.

TS is a duct-type AHU (air handling unit) for horizontal installation in false ceilings. It has a coil with 3-4 or 6 rows.

• Cooling capacity: 4.85 ÷ 24.80 kW
• Heating capacity: 9.80 ÷ 52.06 kW
• Cooling and heating
• Centrifugal fan
• Ducted installation
• For two pipes plants

TS is a compact fan coil unit suitable for horizontal installation in channels and false ceilings. The machine is fitted with a copper/aluminium coil of 3-4 or 6 rows, statically and dynamically balanced centrifugal fans with an impeller and metallic Archimedean screws, 3- or 5-speed electric motor (including 3 selectable speeds) with a running capacitor always engaged, and internal thermal protection. It has static pressure for any possible ducting, a wide choice of remote controls and accessories to meet various needs (G3 air filter, post-heating coils, suction plenum, mixing section, suction grille, delivery flanges with circular or rectangular outlets).

TN is a machine designed for medium-sized rooms in the commercial and industrial sectors.

• Cooling capacity: 15.60 ÷ 155.10 kW
• Heating capacity: 25.20 ÷ 334.10 kW
• Cooling and heating
• Centrifugal fan
• Ducted installation
• For two pipes plants

TN is an alternative to the fan coil units when only filtering, air cooling or air heating is required. Top performance is ensured by high-efficiency copper/aluminium coils of 4 or 6 rows, that can be combined with post-heating coils of 2, 3 or 4 rows. The machine is also fitted with dual-suction centrifugal fans with forward blades for high head levels, coupled with electric motors by means of a belt and pulley with variable pitch. The air is filtered by synthetic G4 filters positioned on the suction line; they can easily be removed for maintenance and cleaning. Alternatively, the FTMxT accessory uses class F7 filters.

TDA is an air-conditioning unit designed for horizontal or vertical installation in the residential, commercial and hotel sectors.
• Cooling capacity: 4.90 ÷ 22.30 kW

• Heating capacity: 10.40 ÷ 45.40 kW