All posts by : apscp

Range of low profile mixed flow fans with ball bearings and brushless DC motors, of high efficiency and low consumption. Manufactured in plastic (models 160 to 800) or in steel (models 1300 and 2000), removable fan body, and rated as standard 90/260V- 50/60Hz for models 160 to 800 and 230V/50-60Hz for models 1300 and 2000. Fan speed 100% adjustable with the potentiometer placed in the connection box (excepted TD-160/100 ECOWATT) or with an external control type REB-ECOWATT. Analogue input with terminals in the terminal box to control the fan with 0-10V input signal.
Working temperatures from -20ºC to +40ºC.
Suitable for any kind of ventilation application where the noise level of the ventilation system is of particular importance and, due to continuous operation, a significant energy saving is desirable. It is also suitable for applications that require a Demand Controlled Ventilation System involving the use of other sensors or controls.

TD-MIXVENT + FILTER BOX MFL-G4

The MIXVENT HEATING system consists on a MFL filtration box installed on the inlet side of the TD-MIXVENT fan and are used when the installation requires supplying filtered clean air. MFL filtration boxes are of EU4 grade filtration and are designed for direct connection with standard circular ducting.

Attributes

• The MFL filtration boxes are supplied with a cover easily removable to replace the filter.

Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels.

Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting

• Terminal box
  Built-in, IP65 terminal box that does not add to the overall height dimensions.
• Airtight joints
  Rubber gaskets for a more airtight joint with the installation’s ducts.
• High performance Impeller
  New impeller geometry for reduced sound levels and to offer high performance.
• Mounting bracket
  Strong mounting bracket supplied with the fan.
• Two mounting positions for support
  The product can be mounted in two different positions by changing the position of the support’s anchoring.

Range of in-line fans for circular ducts, designed for high aerodynamic performances with a very compact profiles and very low sound levels.The range comprises 7 diameters and covers a flow range from 260 to 1080 m3/h.
Low profile compact casing manufactured from galvanised sheet steel. The terminal box and the mounting bracket do not increase the product’s profile.Optimised design of the impeller, guide vane and outlet diffuser, manufactured from injection moulded plastic, to increase performance and lower the sound level.
Airtight joint between the galvanised steel casing and the plastic guide vane to avoid air leaks. Rubber gaskets on the flanges to improve airtightness with the ducts. Silent block between the motor and the holder to reduce the motor’s vibrations and lower the sound level of the installation, even in terms of speed regulation.

JETLINE models with 220-240V 50/60Hz motor
Fitted with an external rotor single-phase AC motor:

• Class F, IP 44
• Speed controllable by voltage.
• Thermal protection with manual reset.
• Working temperature: -20/60 ºC