May 2024 – Page 23 – Astro Power Systems

NRB

Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.

Cooling capacity: 56.00 ÷ 202.00 kW
Outdoor installation
R410A refrigerant
Cooling only
Scroll compressor
Axial fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Night mode (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants

NLC

Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for medium-sized services in residential and commercial buildings.

Cooling capacity: 52.00 ÷ 316.00 kW
Indoor installation
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Internet connection (Option)
For two pipes plants

MIC

Air-cooled modular refrigerant to produce chilled water, designed and created to satisfy the cooling needs of industrial buildings.

Cooling capacity: 2.99 kW
Cooling only
Reciprocating compressor
Axial fan
For two pipes plants

Air-cooled modular refrigerant to produce chilled water, designed and created to satisfy the cooling needs of industrial buildings. It is equippend with alternative hermetic compressor and coaxial heat exchanger. Thanks to its modular construction, manageable in three different solutions, the installation can be adapted to suit specific system development needs whilst guaranteeing improved safety and reliability. Operation at full load up to 45 °C external air temperature. Unit can produce chilled water 20 °C up to -10 °C. The hydraulic and refrigeration circuits are separable: cleaning operation are quick and easy as removing one or the two parts.

CL CO

Air/water chiller for indoor installation. Suitable for air-conditioning and the production of hot water for small/medium services in residential and commercial buildings.

Cooling capacity: 5.50 ÷ 39.30 kW
Indoor installation
R410A refrigerant
Cooling only
Scroll compressor
Plug fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Lownoise version (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Compatible with VMF system (Variable Multi Flow) (Option)
Internet connection (Option)
For two pipes plants

ANL 1903 CO

Air/water chiller for outdoor installation. Suitable for summer air-conditioning and the production of hot water for small/medium services in residential and commercial buildings

Cooling capacity: 5.70 ÷ 43.00 kW
Outdoor installation
R410A refrigerant
Cooling only
Scroll compressor
Axial fan
Plate exchanger
Heat recovery (Option)
Pump kit (Option)
Water tank (Option)
Network operation (Option)
Compatible with ModBus protocol (Option)
Compatible with VMF system (Variable Multi Flow) (Option)
For two pipes plants

Rooftop unit RTY

Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with high crowding.

R410A refrigerant

Roof-Top autonomous air-condensed conditioner with structure in powder-painted galvanised sheet metal and 50 mm panels insulated with polyurethane. MB3 configuration with mixing chamber with three dampers, intake fan and heat recovery on the expelled air. Cooling circuit with scroll compressor with high yield and low electricity absorption, standard Cu-Al thermal heat exchange coils (pre-painted Cu-Al available as optional) or Cu-Cu Sn. Standard or high-head fans on ambient side, plug fans with permanent magnets motor and differential pressure switch. Axial fans (outer side) with pressostatic rpm control device or EC motor. Flat G4 filters as standard on the outdoor air flow and intake. F7 or F9 pocket filters available upon request, but on delivery only. Electronic condensation and evaporation control as standard, for further extending the operating limits of the unit.

Rooftop unit RTX

Treatment section with plug fan fans coupled to EC brushless motors
Thermodynamic heat recovery
Enthalpical freecooling / freecooling option
For medium-crowded applications

Description
Autonomous air-condensed conditioner of the Roof-Top type. Designed for the treatment, filtering and renewal of the air in applications with average crowding.

R410A refrigerant
Cooling only
Cooling and heating
Scroll compressor
Plug fan

Central air handling unit SPL

SPL is an air treatment control unit designed for areas used for wellness, thermal baths, swimming pools, health spas.
SPL is an air handling unit for sports areas and swimming pools. The unit combines a cooling circuit with a recovery system for sensible and latent air taken from the damp air expelled from the rooms, thereby optimized for reduced energy consumption. The unit is a “plug & play” machine (i.e. ready for use) whose main function is to dehumidify and, at the same time, ensure the control of the hygro thermometric conditions in the rooms. It has an effective heat recovery system (water side) that can be used to partially heat the swimming pool water at zero cost. The structure and all the internal components are built to guarantee optimum corrosion resistance.

Central air handling unit NCD

NCD is an air treatment control unit for use in commercial and industrial systems for large environments.
NCD is an air treatment control unit with double sandwich buffer panelling fixed to the frame with a panel-holder (no screws are used, to avoid any risk of seepage), with aluminium profiles with rounded-edge forms. The internal machine components are: new, high-efficiency heat exchangers with limited pressure drops, dual-suction centrifugal fans with forward or reversed blades, plug fans with inverter control, 3-damper mixing chamber, wide choice of high-surface filters for reducing pressure drops and increasing the lifespan, PVC drop separator, heat recovery units with high thermal exchange. Wide range of accessories for air suction/expulsion and for the fan motor sections, and for common sections like the pressure gauge and pressure switch.

TVS

TVS is a ductable thermoventilating unit, designed to guarantee high heads in small or medium-sized rooms with nominal air flow rates from 800 to 5200 m³/h. As standard, it is suitable for 2-pipe systems, but the availability (as an accessory) of the secondary water coil, which can be installed inside the unit downstream of the main coil, makes it also suitable for 4-pipe systems. The unit is suitable for both horizontal installation in the false ceiling and vertical installation on the wall for greater versatility of use.