April 2024 – Page 13 – Astro Power Systems

SDT G2 PLUS+ Series

4-20kW | Three Phase | 2 MPPTs

The GoodWe 4-20 kW SDT G2 PLUS+ series inverter is specially designed for three-phase residential and small commercial projects. The integrated features of high efficiency allow for optimized power generation during the inverter’s service cycle. With its lightweight and easy-to-install design, the SDT G2 inverter offers comfort and great convenience for operators and installers. Users can also take all-around smart control of energy management utilizing the featuring 24-hour load consumption monitoring enabled by GoodWe HK3000. Meet the perfect choice of maximum energy yield for residential and small-scale commercial usage.

Smart Shadow Scan with adjustable scan interval
Multi-protocol compatibility for smart home integration
Optional exchangeable DC Type II SPD & SPD failure alarm
Optional Arc Fault Circuit Interrupter (AFCI)
Elegant & compact
Fanless & quiet

MS G3 Series

5-10kW | Single Phase | 3 MPPTs

The MS G3 single-phase inverters of 5-10kW provide powerful and versatile solution options for residential buildings. This model boasts 3 MPPTs for various complex rooftops, thus leading to high power efficiency. The ultra-low 50V startup voltage allows inverters to kick in earlier during the day and presents more power generation. In addition, by supporting up to 20A DC max. input current per MPPT, the MS G3 Series is ideal for high-power modules, which makes full use of power generated and presents lower LCOE. Importantly, PID (potential induced degradation) recovery function is supported for better module performance. The inverter also takes safety measures including optional Arc-Fault Circuit Interrupter (AFCI) and Type II Surge Protection Device (SPD) on both DC & AC sides to protect the system from electrical fire and lightning hazards in extreme environments.

24-hour load consumption monitoring
Optional AFCI & rapid shutdown
50V startup voltage
Elegant and compact design
IP66
20A

MIS Series

1.6-2kW I Single Phase I Microinverter
Plug & Play
IP67
GoodWe’s MIS Series microinverter is an ideal solution for residential and small commercial settings. Designed to work seamlessly with solar panels, each microinverter is paired with four panels, enabling individual panel tracking. The MIS Series microinverter is equipped with built-in WiFi and Bluetooth for easy setup and maintenance. Furthermore, it elevates monitoring and communication capabilities, empowering users to monitor each panel’s performance in real time and identify any issues or inefficiencies. With GoodWe MIS, you will be able to maximize energy production and reduce energy losses, while also enhancing safety.

4-in-1 design for multi-angle rooftop
Max. DC voltage 60V
4 MPP trackers, module-level MPPT
Module level monitoring
Plug & Play
IP67

DNS Series

3-6kW | Single Phase | 2 MPPTs

Fanless

Noiseless

GoodWe DNS series is a perfect match for residential installations thanks to its compact size and light weight. Manufactured for durability and longevity under modern industrial standards, GoodWe DNS series is IP65 rated so it can be mounted either inside or outside your home. With a low start-up voltage of only 80V and the widest MPPT voltage range of 80-550 V, these inverters can provide greater options for your household system. The GoodWe DNS series is also extremely light, 30% lighter than other inverters.

80V start-up voltage
Wide range of MPPT voltage
Fanless and noiseless
Small, light weight & easy to install
Export control
Flexible communication methods

DNS G3

3-6kW | Single Phase | 2 MPPTs

IP66

Fanless cooling

The GoodWe DNS G3 series inverter is specially designed for single-phase residential applications. Integrated with high-current input and DC input oversizing capabilities, the series can bring you optimized power generation and make substantial returns. With its lighter and fanless house fit-in compact design, the DNS G3 inverter provides a reliable power supply yet runs at a super quiet operation below 25dB. The inverter also takes safety measures including optional Arc Fault Failure Interrupter (AFCI) and Type II Surge Protection Device (SPD) on both sides to protect the system from electrical fire and lightning hazards in extreme environments for guaranteed safety.

24/7 load consumption monitoring
Multiple communication protocols supported
Optional AFCI preventing electrical fires
Optional AC & DC Type II SPD & SPD failure alarm
IP66
Fanless cooling

Safepower Evo HFT from 100kVA to 600kVA

Safepower Evo HFT series is capable of providing clean energy to the connected load, without interruption, regardless of the conditions of the supply network; ideal for the protection of computer networks, telecommunications and critical systems in general.
Safepower Evo HFT offer full IGBT technology thanks to the galvanic isolation provided by the transformer on board.

Its available from 100 to 600 kVA, with double conversion on-line technology according to the VFI-SS-111, as defined by the IEC EN 62040-3.

safepowerevohf-1440x600-removebg-preview

Safepower Evo HF from 10 to 200 kVA

Safepower Evo HF series is capable of providing clean energy to the connected load, without interruption, regardless of the conditions of the supply network; ideal for the protection of computer networks, telecommunications and critical systems in general.

Safepower Evo HF is available in models from 10 to 200 kVA, with double conversion on-line technology according to the VFI-SS-111, as defined by the IEC EN 62040-3.

Safepower Evo from 20 to 1000kVA

Safepower Evo UPS double conversion (VFI-SS-III), are distinguished for small dimensions in relation to the power unit; with IGBT inverter system and “Battery Health Guard” permits an increase in the lifespan of the battery resulting in savings.

Data center, telecommunications, banks, hospitals, and industrial processes all applications for which energy delivery has often vital importance, with Safepower Evo no longer have to fear dramatic blackouts or dangerous voltage fluctuations.

Green Point from 1 to 10 kVA

GREEN POINT is the new range of very high performance single-phase online double conversion UPS (VFISS-111), ideal for ensuring quality energy for users.
The UPS of the new Green Point series, characterized by a low distortion input current, a Cosphi of up to 0.99 and an output power factor of 0.9, represents a new concept product that can be used in high configuration efficiency (HE) by reducing losses.
Ideal both in the IT sector for powering servers and in the industrial and commercial sector; the Rack/Tower version highlights the versatility of the UPS in various applications.
Via the SNMP network card it is easy to interface with the various diagnostic, management supervision and application shutdown systems; options such as autonomy extension are also available.

EN50171 compliant
Online double conversion technology
Selectable high efficiency operating mode
Battery start mode
Battery extension option
Hot-swappable battery
Emergency stop Emergency Power-Off (EPO)
RS232, USB, SNMP communication port , RELAYS
LCD screen rotation in Rack/Tower mode

Exchange – MTR from 16 to 1600 A

The Static Transfer System (STS), based on “break before make” technology, deals with transferring the load between two energy sources without interruption of continuity.
It is available in the MTR (single-phase) versions from 16 A to 32 A and Exchange (Three-phase + N 3 and 4 poles) from 63 A up to 1600 A.

MTR: